SECAM
SECAM, also written SÉCAM (Séquentiel couleur à mémoire, French for "Sequential Color with Memory"), is an analog color television system first used in France. A team led by Henri de France working at Compagnie Française de Télévision (later bought by Thomson) invented SECAM. It is, historically, the first European color television standard.
ust as the other color standards adopted for broadcast usage over the world, SECAM is a compatible standard, which means that monochrome television receivers predating its introduction are still able to show the programs, although only in black and white. Because of this compatibility requirement, color standards add a second signal to the basic monochrome signal, and this signal carries the color information, called chrominance or C in short, while the black and white information is called the luminance (Y in short). Old TV receivers only displays the luminance, while color receivers process both signals.
Additionally, for compatibility, it is required to use no more bandwidth than the monochrome signal alone; the color signal has to be somehow inserted into the monochrome signal, without disturbing it. This insertion is possible because the spectrum of the monochrome TV signal is not continuous, hence empty space exists which can be utilized. This lack of continuity results from the discrete nature of the signal, which is divided into frames and lines. Analogue color systems differ by the way in which empty space is used. In all cases, the color signal is inserted at the end of the spectrum of the monochrome signal.
In order to be able to separate the color signal from the monochrome one in the receiver, a fixed frequency sub carrier has to be used, this sub carrier being modulated by the color signal.
The color space is three dimensional by the nature of the human vision, so after subtracting the luminance, which is carried by the base signal, the color sub carrier still has to carry a two dimensional signal. Typically the red (R) and the blue (B) information are carried because their signal difference with luminance (R-Y and B-Y) is stronger than that of green (G-Y).
SECAM differs from the other color systems by the way the R-Y and B-Y signals are carried.
First, SECAM uses frequency modulation to encode chrominance information on the sub carrier.
Second, instead of transmitting the red and blue information together, it only sends one of them at a time, and uses the information about the other color from the preceding line. It uses a delay line, an analog memory device, for storing one line of color information. This justifies the "Sequential, With Memory" name.
Because SECAM transmits only one color at a time, it is free of the color artifacts present in NTSC and PAL resulting from the combined transmission of both signals.
This means that the vertical color resolution is halved relative to NTSC. It is however not halved compared to PAL. Although PAL does not eliminate half of vertical color information during encoding, it combines color information from adjacent lines at the decoding stage, in order to compensate for "color sub carrier phase errors" occurring during the transmission of the Amplitude-Modulated color sub carrier. This is normally done using a delay line like in SECAM (the result is called PAL DL or PAL Delay-Line, sometimes interpreted as DeLuxe), but can be accomplished "visually" in cheap TV sets (PAL standard). Because the FM modulation of SECAM's color sub carrier is insensitive to phase (or amplitude) errors, phase errors do not cause loss of color saturation in SECAM, although they do in PAL. In NTSC, such errors cause color shifts.
The color difference signals in SECAM are actually calculated in the YDbDr color space, which is a scaled version of the YUV color space. This encoding is better suited to the transmission of only one signal at a time.
FM modulation of the color information allows SECAM to be free of the dot crawl problem commonly encountered with the other analog standards and first widely noticed with Laserdiscs. Dot crawl can be removed from PAL and NTSC-encoded signals using a comb filter. Such filters are usually only included in high-end displays. Dot crawl patterns (animated checkerboard) are easily visible along vertical lines in DVD menus displayed even by expensive (eg. plasma) displays if these displays are connected to a signal source (DVD player) using a composite PAL or NTSC connection rather than, for example, RGB.
The idea of reducing the vertical color resolution comes from Henri de France, who observed that color information is approximately identical for two successive lines. Because the color information was designed to be a cheap, backwards compatible addition to the monochrome signal, the color signal has a lower bandwidth than the luminance signal, and hence lower horizontal resolution. Fortunately, the human visual system is similar in design: it perceives changes in luminance at a higher resolution than changes in chrominance, so this asymmetry has minimal visual impact. It was therefore also logical to reduce the vertical color resolution.
A similar paradox applies to the vertical resolution in television in general: reducing the bandwidth of the video signal will preserve the vertical resolution, even if the image loses sharpness and is smudged in the horizontal direction. Hence, video could be sharper vertically than horizontally. However, because of the interlacing, vertical resolution is effectively not as great as the number of scan lines. Additionally, transmitting an image with too much vertical detail will cause annoying flicker on television screens, as small details will only appear on a single line, and hence be refreshed at half the frequency. Computer-generated text and inserts have to be carefully low-pass filtered to prevent this.